Mains-Powered Outdoor Alarm Siren with Strobe Light JL100A 433MHz

Mains-Powered Outdoor Alarm Siren with Strobe Light JL100A 433MHz

Wireless Outdoor Siren: Designed to work only in conjunction with a home alarm system (does not operate independently). In the event of an alarm, the system activates the siren which emits a very loud 120dB sound and turns on the flashing light to scare intruders and signal danger.

Security: Built with advanced RF control technology, the siren offers high accuracy and reliability. Suitable for use in homes, shops, warehouses, offices and other environments.

Supports alarm for: Intrusion (Burglarproof),Fire,Gas/LPG Leak,Emergency (SOS)

Instructions for Connecting (Pairing) with the Alarm System:

1. Plug the siren into a standard 110V or 220V outlet.
2. Turn the siren on its back and briefly press the “SET” button; all four LEDs will light up.
3. The siren enters pairing mode and waits for a signal from the alarm system.
4. From the alarm panel, send the wireless signal (refer to the alarm system manual).
5. When the siren beeps, pairing has been completed successfully.
6. Briefly press SET again, a long beep will be heard and the LEDs will turn off (exit pairing mode).

Note: If the siren emits 4 beeps, pairing has failed for one of the following reasons:

1. The siren has been previously paired with this system.
2. The system has reached the maximum limit (up to 10 wireless sirens)

Deleting Pairings (Reset):

1. Plug the siren into the socket.
2. Briefly press SET, all LEDs light up.
3. Hold down SET until you hear a beep.
4. All previous pairings are deleted.