LED Bulb Set M6 Pro

LED Bulb Set M6 Pro

Powerful lighting: Each lamp provides very powerful lighting with a maximum power of 60Watt. The consumption is equivalent to the lighting power provided, 7000 Lumen per lamp. The output light is 6500K white.

Different models: Different sets of bulbs for different uses. High beam, low beam and low beam, depending on the vehicle the model of bulb used varies. Models in current condition suitable for different vehicle models. 
H1 (high beam, low beam & fog light),
H3 (dipped beam), 
H7 (high beam & low beam),
H11 (low beam & fog lights),
980-881 (dim light), 
9005 (high beam), 
9006 or HB4 (low beam & fog lights).

longevity: The LED lamp set is equipped with an active fan for forced cooling, has a body built with resistant Aluminum Alloy material for uniform heat transfer. Lifespan up to 30,000 hours of operation.

Plug & Play: The bulb set is easily installed depending on your car. Equipped with a CanBus chip, the bulb set is easily installed without displaying an error in your car's electrical system. Instant ignition at maximum brightness.

Easy installation:
Depending on the bulb model and car model, the installation of the bulbs also varies.
Some vehicle models may require the use of an adapter to install LED lights.
(H7)

• Make sure the machine is turned off.
• Remove the headlight protective cover.
• Remove the lamp energizer.
• Remove the old halogen bulb.
• Remove the clip from the LED bulb.
• Mount the clip in place of the LED bulb.
• Insert the LED bulb carefully without touching the LED.
• Make sure to place it in the correct position (LED panels positioned left and right).
• Install the power plugs.
• Test the LED lights.
• Put on the protective cap.

(H11 – 9005 & 9006)

• Turn off the car.
• Remove the headlight cover.
• Remove the lamp's power plug.
• Turn the bulb clockwise to remove it.
• Carefully insert the LED bulb by turning it counterclockwise to install it.
• Make sure the LEDs are oriented left-right.
• Mount the power plug.
• Test the lamps.
• Put on the protective cap.

It is suggested that a hole be made in the protective cap to increase ventilation.