LED Bulb Set G11

LED Bulb Set G11

Resistant – Canbus Package: The LED bulb set is equipped with an active fan for forced cooling, has a body built with resistant Aluminum Alloy material and with a built-in fan for uniform heat transfer, the lifespan reaches up to 30,000 hours of operation. The package enables efficient operation of LED lights without displaying Error on your car's dashboard or without affecting the LED brightness.

Powerful lighting: Each lamp provides very powerful lighting with a maximum power of 65Watt and voltage: DC10-24V. The consumption is equivalent to the lighting power provided, 7000 Lumen per lamp. The output light is 6500K white.

Different models: Different sets of bulbs for different uses. High beam, low beam and low beam, depending on the vehicle the model of bulb used varies. Models available: H1, H3, H7, H11, 881, 9005 and 9006.

Easy installation:
Depending on the bulb model and car model, the installation of the bulbs also varies.
Some vehicle models may require the use of an adapter to install LED lights.
(H7)

• Make sure the machine is turned off.
• Remove the headlight protective cover.
• Remove the lamp energizer.
• Remove the old halogen bulb.
• Remove the clip from the LED bulb.
• Mount the clip in place of the LED bulb.
• Insert the LED bulb carefully without touching the LED.
• Make sure to place it in the correct position (LED panels positioned left and right).
• Install the power plugs.
• Test the LED lights.
• Put on the protective cap.

(H11 – 9005 & 9006)

• Turn off the car.
• Remove the headlight cover.
• Remove the lamp's power plug.
• Turn the bulb clockwise to remove it.
• Carefully insert the LED bulb by turning it counterclockwise to install it.
• Make sure the LEDs are oriented left-right.
• Mount the power plug.
• Test the lamps.
• Put on the protective cap.

It is suggested that a hole be made in the protective cap to increase ventilation.