LED Bulb Set S21

LED bulb set S21

Description:

LED Bulb Set: Suitable accessory for replacing damaged (or halogen) headlights of your car. 
The lamp set provides powerful lighting.  
LED lights, unlike normal (halogen) lights, turn on instantly. 
They offer powerful lighting – for increased safety when driving at night.

Different models: The headlight set comes in two models: H7 and H11. 
The H7 headlight set is suitable for both high beam and low beam (depending on the vehicle).
H11 headlight set – mainly used for low beam and dipped beam (depending on the car).

Great longevity: Each LED light is equipped with a built-in fan. 
Constructed with durable aluminum alloy material. 
The resistant structure enables uniform temperature distribution and resistance to various shocks on the road.
The built-in fan turns on instantly (as soon as you turn on the car lights).

Powerful lighting: Set of lamps equipped with SMD LED chip. 
Powerful lighting 8000 Lumen each, with 100 Watt power. 
White light output 6500 Kelvin. 

CanBus module: Each bulb is equipped with a CanBus chip, which allows the lights to work without displaying an error on your car's dashboard. 

installing: 

Depending on the bulb model and car model, the installation of the bulbs also varies. 
It is suggested that the installation be done by an electrician. 

• (H7)Make sure the machine is turned off.
• Remove the headlight protective cover.
• Remove the lamp energizer.
• Remove the old halogen bulb.
• Remove the clip from the LED bulb.
• Mount the clip in place of the lamp.
• Insert the LED Bulb carefully without touching the LED.
• Make sure to place it in the correct position (LED panels positioned left and right).
• Install the power plugs. 
• Test the lamps.
• Put on the protective cap.

Some vehicle models may require a mounting adapter.

(H11)

• Turn off the car.
• Remove the headlight cover.
• Remove the lamp's power plug.
• Turn the bulb clockwise to remove it.
• Carefully insert the LED bulb by turning it counterclockwise to install it.
• Make sure the LED chips are oriented left-right.
• Mount the power plug.
• Test the lamps (turn them on).
• Put on the protective cap.

It is suggested that a hole be made in the protective cover to increase the amount of air for ventilation.