LED Bulb Set (H1, H7 & H11)

LED Bulb Set (H1, H7 – H11)

Description:

Lighting Accessory (replacement):
The lamp set is suitable for various vehicles. 
The set comes in different models (H1, H7 & H11), which allows for wide use. 
Replacement accessory for high beam, low beam or fog light (bumper light).

Different models:
LED bulbs come in different models: H1 (for high beams), 
H7 (for high and low beams).
and H11 (for low beam and fog lights).
(*Depending on the vehicle, the usage also varies).

Powerful lighting:
The LED light set is built with LED chips (COB). 
Each lamp has a power of 28 watts at a voltage of DC 12V.
Light output in white color 6000K.

Easy installation: 
Depending on the bulb model and car model, the installation of the bulbs also varies. 
Some vehicle models may require the use of an adapter to install LED lights. 
(H7) 

• Make sure the machine is turned off. 
• Remove the headlight protective cover. 
• Remove the lamp energizer. 
• Remove the old halogen bulb. 
• Remove the clip from the LED bulb. 
• Mount the clip in place of the LED bulb. 
• Insert the LED bulb carefully without touching the LED. 
• Make sure to place it in the correct position
  (LED panels should be positioned left-right). 
• Install the power plugs. 
• Test the LED lights. 
• Put on the protective cap. 

(H11) 

• Turn off the car. 
• Remove the headlight cover. 
• Remove the lamp's power plug. 
• Turn the bulb clockwise to remove it. 
• Carefully insert the LED bulb by turning it counterclockwise to install it. 
• Make sure the LEDs are oriented left-right. 
• Mount the power plug. 
• Test the lamps. 
• Put on the protective cap. 

It is suggested that a hole be made in the protective cap to increase ventilation. 
If you feel unsure, it is suggested to go to an electroauto (service) – for proper assembly.