Car LED Bulb – T10

LED Car Light – T10 

Description: 

Machine Fridge: Replacement accessory suitable for indoor and outdoor lamps. 
The bulb is a T10 (W5W) LED model, easily installed. 
Interior, position and license plate lamps.

White Light: The lamp is equipped with 9 3030 – SMD LED diodes. 
The bulb provides 6500K white light output, with low energy consumption of 2.65W.

CanBus module: The headlight is equipped with a CanBus module, it does not display an error on your car's dashboard.
Suitable for various vehicle models,

installing:

• Make sure the machine is turned off.
• Get the materials you may need, (Gloves, Pliers, T10 Bulbs)
• Select where you want to replace Frexha.
• Inside the cabin, you may need to remove plastic parts to access the halogen bulb.
• For exterior lights (License Plate or Position) you may need to remove screws or plastic clips.
• To remove the halogen bulb from the socket, you may need to twist or pull the bulb out of the socket.
• In the event that the bulb does not come out by twisting or pulling, you can (carefully) use pliers.
• Insert the LED bulb.
• Install it and make sure it is properly positioned in its place.
• T10 LED bulbs are designed to be installed directly without the need for modification. 
• Test the LED bulb before reinstalling the items you removed during the assembly process. 
• For interior lights, make sure to put the plastic parts in place.
• For outdoor lights, make sure to install the screws or clips in place. 
• If you are replacing different bulbs, repeat the steps for each bulb. 
• Some lamp models are polar sensitive (+ -), in case of malfunction, change the direction of the lamp