LED Bulb Set M8 Pro

M8 Pro LED bulb set.

Description:

LED Bulb Set: Replacement accessory for various vehicle models. 
Allows the replacement of normal (halogen) bulbs with LED bulbs. 
Set of two pieces in packaging in current condition, different models:
H1 (light suitable for low beam & high beam), 
H3 (lamp suitable for low beam), 
H7 (suitable for replacing low or high beam headlights),
9005 (replacement bulb for high beam),
H11 (suitable for replacing fog or dipped headlights).

LED (white): The LED bulb set provides powerful LED lighting, in white color (6000K).
Each of the lamps is equipped with LED chips on both sides, which provide powerful lighting.
Powerful lighting with low energy consumption, 55 watts per bulb. 

CanBus module: Each of the lamps is equipped with a CanBus module. 
Module that enables the lights to work without displaying an error in the car's electronic system.

Plug & Play: The light set is easily installed on your cars, by yourself or by a professional.
Depending on the car, you may need to use an adapter to attach the bulb.

installing:
Depending on the bulb model and car model, the installation of the bulbs also varies.
(H7)

• Make sure the machine is turned off.
• Remove the headlight protective cover.
• Remove the lamp energizer.
• Remove the old halogen bulb.
• Remove the clip from the LED bulb.
• Mount the clip in place of the lamp.
• Insert the LED Bulb carefully without touching the LED.
• Make sure to place it in the correct position (LED panels positioned left and right.)
• Install the power plugs. 
• Test the lamps (turn them on).
• Put on the protective cap.

Some vehicle models may require a mounting adapter.
(H11-9005)

• Turn off the car.
• Remove the headlight cover.
• Remove the lamp's power plug.
• Turn the bulb clockwise to remove it.
• Carefully insert the LED bulb by turning it counterclockwise to install it.
• Make sure the LED chips are oriented left-right (9:00 and 3:00).
• Mount the power plug.
• Test the lamps (turn them on).
• Put on the protective cap.

It is suggested that a hole be made in the protective cover to increase the amount of air for ventilation.