Car Battery Jumper Cables (2000A)

2000A battery cable. 

Description:

Battery cable: Emergency accessory, enables you to start your car when your car battery is dead. The cable enables power transmission at 2000Amp. 

Durable material:Battery cables are constructed with resistant copper material. Coated with resistant PVC plastic material. The cables are 18mm thick, enabling energy transmission up to 2000Amperes. 

Ease of Transportation & Use: Battery cables are suitable for personal use. Easily transportable and easily stored. 

FITNESS: 

• Step 1: Bring the vehicles close enough together that the cables are loose. 
  The ideal distance is about 1.5 meters from each other.
• Step 2: Make sure both vehicles are turned off.
• Step 3: Find the poles (positive & negative) on the batteries of the respective cars.
  Cable with red clip for the positive pole and cable with black clip for the negative pole.
• Step 4: Place the red clamp on the positive pole of the car with the dead battery, then on the positive pole of the donor car.
• Be careful! (Since the car battery contains flammable materials, connecting the positive terminal of the battery can cause sparks, which can cause numerous electronic problems with your car, and can even cause a fire.)
• Step 5: Place the black clamp on the negative pole of the donor car then on a metal part of the car with the dead battery.
• Step 6: After connecting the black clip to a metal part in the car with the dead battery. Start the donor car, after 2 (two) – 3 (three) minutes, leaving it at idle speed.
• Step 7: After another 2 (two) – 3 (three) minutes, start the car with the dead battery.
  IF it does not turn on the first time, try again after 2 (two) minutes.
• Step 8: After the car starts, allow it to idle for about 5 (five) – 10 (ten) minutes.
• Step 9: Remove the cables in the reverse order of installation.
  Remove the cable from the negative terminal of the car with the dead battery, then to the battery of the donor car. 
  Remove the cable from the positive pole of your car (with the dead battery) then to the battery of the donor car.

Be careful! Do not connect the cables to each other when they are connected to the batteries.