LED Bulb Set H4 (XS-250) & Position Lights

LED Bulb Set H4 (XS-250) & Side Marker

Replacement accessory: The LED bulb set is equipped with two LED bulbs (H4) and two halogen bulbs (T10). It allows you to replace your car's current headlights (halogen or damaged) with LED lights. 

Powerful lighting: The bulb set provides 6000K white light output. The H4 bulb model serves as both high and low beam in one bulb. With a power output of 120 watts (high beam) and 80 watts (low beam) – for each bulb.

longevity: Each of the lamps is equipped with a CanBus module and capacitors that enable the normal operation of the lamp. It does not display an error on the dashboard through the incorporated module. Built with resistant aluminum alloy material and copper pipes enables uniform heat transfer of the LED lamp. The incorporated fan turns on immediately (at the same time as the LED light. Enabling enhanced cooling.

Frexha T10: Model suitable for various uses. Allows replacement of lights (depending on the car): license plate lights, position lights or interior lights (depending on desire or need). The bulbs provide powerful white LED light output. Each bulb has a power of 2.5watts.

Easy installation: LED lights and bulbs are easy to install. 
Plug & Play for most vehicles. You can install the lights yourself, but for efficiency, installation by an electrician is recommended.
(H4)

• Make sure the machine is turned off.
• Remove the headlight protective cover.
• Remove the lamp energizer.
• Remove the old halogen bulb.
• Remove the clip from the LED bulb.
• Mount the clip in place of the lamp.
• Insert the LED Bulb carefully without touching the LED.
• Test the lights.
• Put on the protective cap.
• It is suggested that you make a hole in the lid for better ventilation.

T10 (Frexhat)

• Make sure the machine is turned off.
• Get the materials you may need, (Gloves, Pliers, T10 Bulbs)
• Select where you want to replace Frexha.
• Inside the cabin, you may need to remove plastic parts to access the halogen bulb.
• For exterior lights (License Plate or Position) you may need to remove screws or plastic clips.
• To remove the halogen bulb from the socket, you may need to twist or pull the bulb out of the socket.
• In the event that the bulb does not come out by twisting or pulling, you can (carefully) use pliers.
• Insert the LED bulb.
• Install it and make sure it is properly positioned in its place.
• T10 LED bulbs are designed to be installed directly without the need for modification. 
• Test the LED bulb before reinstalling the items you removed during the assembly process. 
• For interior lights, make sure to put the plastic parts in place.
• For outdoor lights, make sure to install the screws or clips in place. 
• If you are replacing different bulbs, repeat the steps for each bulb. 
  Some lamp models are polar sensitive (+ -), in case of malfunction, change the direction of the lamp.

Frequently Asked Questions:

1. Can I install them myself??
   Yes, you can install LED lights yourself, but this is done at your own risk.
   We suggest that you install it at a service or electroauto for safety and efficiency.
2. What car is the H4 bulb model suitable for??
   The H4 bulb provides powerful lighting (two functions in one bulb) and functions as both low and high beam. 
   Different cars have headlights with different bulb designs. 
   You must first confirm the model of the bulb in your vehicle's headlight.